Yubang automatic wax insert drilling machine-lower stone drop rate, make wax insert production more standardized!

a piece of jewelry from production to production needs to go through many complicated processes to complete, among which wax inlay processing is very time-consuming. The stone loss rate is an important factor affecting the wax inlay processing process, and it also plays a vital role in the quality of wax inlay production.

The working mode of Yubang automatic wax insert drilling machine is very simple. With its three-point drill bits, the wax insert is completed by sucking the material stone from the material plate and then pointing it onto the wax mold. As the wax mold machined by wax inlay still has to go through many steps, the following "reverse mold" process will test the stone removal rate of wax inlay processing very much. If the stone removal rate of wax inlay is very high, the initial type of jewelry molded by wax inlay will not be qualified.

Yubang automatic wax insert point drilling machine can effectively reduce the problem of high stone drop rate.

First of all, Yubang automatic wax insert point drilling machineplate has heating function, the plate heats the stone, which increases the adhesion between the stone and the wax mold, making the stone not easy to fall;

Secondly, the three-point drill bit of Yubang automatic wax insert point drilling machine,uses the pressing method to drill, so that every stone on the wax model is stuck in place;

Finally, automatic wax insert point drilling machinemimics the gentle strength of a human hand, the damage to the wax model is avoided, which further reduces the occurrence of the stone drop rate.

Yubang automatic wax insert point drilling machine makes the stone loss rate of wax insert products lower and makes the wax insert products more standardized!