Hurry up to collect! The Yubang Wax Setting Machine Maintenance Book is here!

Even the best equipment needs maintenance, the correct maintenance can not only ensure the normal operation of the machine, but also extend the service life. Wax setting machine is an important equipment in the jewelry processing industry, here we will talk about how to maintain the wax setting machine, to help you better use and maintain this machine.
1. Regular lubrication

• Importance: It is very important to lubricate the shaft guides and screws of the wax setting machine regularly. This will minimize friction and wear between parts.
• Frequency: It is recommended to lubricate the machine 2 times a month. If the machine is used frequently, the number of lubrication times can be increased; on the contrary, the number of times can be reduced.
• Note: Always use professional lubricant and follow the instructions to avoid overuse or improper use leading to machine failure.

2. Regular inspection

• Inspection content: Regularly check whether the various parts of the equipment are functioning normally and whether the connecting parts are tightened. Especially the screws of the C-axis fixing ring, because this part often needs to take and change the fixing mold, it is easy to loosen, so it is necessary to replace the screws regularly.
• Frequency: Check briefly before each use to make sure everything is normal.

3. Clean the pneumatic vacuum filter

• Importance: Wax encrusting machines work through the suction and spray of gas, and the pneumatic vacuum filter filters out impurities in the gas. Regular cleaning of the filter allows the machine to work faster and more stably.

4. Drain the sewage from the air compressor and the filter

• Importance: Yubang wax setting machine relies on the air pressure created by the air compressor to drive the work, while the filter is used to filter the impurities and water in the gas. Regularly draining the effluent from these devices ensures the proper functioning of the machine.
• Frequency: It is recommended to discharge it once a day.

5. Keep clean

• Importance: During the production process, the surface of the machine will be covered with a lot of dust. Regular cleaning can prevent the accumulation of dust and affect the performance of the machine.
• Method: Wipe the surface of the machine with a soft cloth and avoid scraping with hard objects.

6. Pay attention to safety

• Safe operation: When using the wax setting machine, you must follow the safe operation procedures. Especially when the machine is operating at high speed, do not touch the individual axes.
• Abnormal handling: If any abnormality is found during the use, stop using immediately and contact the after-sales service. Yubang Technology has a professional after-sales service team that responds quickly, so that you can have no worries after the sale.

With these simple maintenance steps, you can ensure that your wax setting machine is always in the best condition, improve productivity and extend its service life. We hope these maintenance tips are helpful to you! If you have any questions or need further assistance, please feel free to contact us.

Yubang Technology is a jewelry processing equipment manufacturer with 20 years of experience, providing you with one-stop technical solutions for jewelry processing.